Mini high voltage generators sealed inside metallic enclosure and analog control by wire.
The small enclosure can be accomodated directly inside the working area thanks to high sealing level (IP65) and small form factor.
This generator can be managed only via 16 pin connectors (no local control) and it's designed to be used with RT Collector Web or other system able to manage the safety rules to access to experimental area like safety switch and interlocks.
It can't be used alone.
|High voltage cable lenght (with metallic shield)||0.5 m|
|Supply voltage - DC volatge||24|
|Nominal power||15 W|
|Output Voltage range||0..40 kV|
|Output current||0..0.4 mA|
|Ripple: p-p of output voltage||0.1%|
|Stability: per 8 hours after 1/2 hour warm up||0.02%|
|0-5 VDC corresponding to 0-100% of output voltage||Monitor|
|0-5 VDC corresponding to 0-100% of output current||Monitor|
|0-5 VDC corresponding to 0-100% of output voltage||Command|
|0-5 VDC corresponding to 0-100% of output current||Command|
|High voltage ON output||NO|